The RDC, Rapid Deployment Craft, is the
safest, most durable, easiest to use, rescue boat ever made.
It works in so many applications, that it is the only non-motorized boat
a department may need. The RDC is a radical departure from the practice
of drafting recreational craft into rescue service. This boat was
designed and built to take the stresses incurred by those who need to
work in demanding, water related rescue situations. If you have never
seen anything like it, you are not alone. It was one of those, "Why
didn't I think of that"!, type of stories. The RDC has extremely
rockered (upturned) ends. They allow the rescuer to "drive" the boat's
open end over the victim while the victim's head remains above water at
all times. It also allows a rescuer to reach forward into a pour-over
while still safely centered in the boat. The floor is open at each end,
allowing 2 entry points. The freeboard height is only inches, enabling a
rescuer to easily pull a victim into the boat. This also allows a diver,
with tanks on, to pull themselves into the craft with minimal effort.
The two entry portals on either end also act as carrying points which
provide a perimeter of safety in case of sudden ice failure or mud
sinking. These carrying points are comfortably at your sides. Carrying
the RDC is like using a litter with long handles, which, by the way, is
one of its many uses. The RDC will store in a 2' cube, inflate in a
heartbeat, and can easily be carried by one person. The most common way
to carry it is deflated and stored in a rescue boat or vehicle. Think
about how often you arrive at a scene and cannot find a place to launch
your motorized boat. This is why you should have the RDC along on every
call.
The RDC is designed to withstand severe use conditions for many years. To
achieve this, we assemble each rescue craft with the finest, most advanced
materials and use well tested construction techniques. The RDC fabric is the
most durable in the Industry. It is a PU/PVC/polyester alloy material with
all the seams being welded and taped for ultimate strength and air
retention. No glue or adhesive is used so our seams attain the same strength
as the fabric which means there are no weak links in our rescue boats. The
urethane coating also contains more UV inhibitors than any other material on
the market. This allows prolonged sun exposure with no fabric degradation,
as occurs with traditional rubber boats. Our floor is also very special. It
is an I-Beam Design that, with very little air pressure, can become rock
hard. This enhances stability and makes the RDC an excellent litter for
carrying an incapacitated victim.
The RDC is one tough cookie. It may last so long that you will forget all
about us. That is our goal and our greatest complement. When you receive a
rescue boat from us the care and feeding instructions will be incredibly
short. Store the RDC deflated and bagged. This will give you fast access,
less chance of damage and will lengthen the life of the rescue boat. Keep it
in a dry area, out of direct sunlight. We understand the conditions that
exist with our customers and believe that with a little care, most will have
the RDC in service for many safe and productive years. Under ‘normal’
emergency response use, we believe that the rescue boat can last a decade or
more. For more information, see the Care and Feeding of
your RDC.
RDC SPECIFICATIONS |
|
Length |
15'4" |
|
Width |
48" |
|
Tube Diameter |
12" |
|
Floor Length |
8' |
|
Access Holes |
22"x40" |
|
Weight |
50 lbs. |
|
No. of Air Chambers |
3 |
|
Buoyancy |
>2000+ lbs. |
|
Fabric |
35oz. PU/PVC |
|
Warranty, with registration |
5 years |
| |
2008 RDC PRICING - EFFECTIVE MAY 1, 2008* |
| RDC Water Rescue Craft -
Includes Carrying Bag, 2 Paddles, Air Fill Manifold and Repair Kit |
$3900 |
| Accessories |
|
| Tow Shield - Medium Duty for
PWC towing applications |
$450 |
| Tow Shield - Heavy Duty for Snowmobile towing applications |
$600 |
| Tow Hardware - PWC |
$450 |
| Tow Hardware - Snowmobile, ATV, UTV |
$450 |
| Motor Mount - 6hp Max / Tank Mount |
$600 |
Replacement / Repair Parts |
|
| Paddle - 3 piece take apart |
$200 |
| Air Fill Manifold |
$80 |
| Tow Strap System |
$50 |
| Valve - Fill or PR |
$30 |
| Valve Adapter |
$10 |
| Valve Wrench |
$20 |
| Air Floor Replacement |
$1400 |
|